D011D china led tunnel lights
Key words:
Xinheyue
D011D china led tunnel lights
Classification:
Product Details
D011D china led tunnel lights
1. Power supply: solar cell (monocrystalline silicon) 2.5V/120MA
2. Energy storage device: NimH rechargeable battery 1.2V/600MAH Ni-MH high temperature battery
3. Working time: under the standard light intensity, 8H can continuously support 72H
4. Aluminum alloy shell compressive ability, static pressure> 10 tons
5. Display device: φ5 super bright anti-fog LED, LED light color can be customized
6. Working mode: flashing (2Hz ± 20%) or stable on
7. Control light intensity: positive light less than 500Lux
8. Sight distance:>500 meters
9. Service life: effective use> 3 years
10. Working environment:-20 ℃ ~ +60 ℃
11. Specification: 105*105*75mm;
One color:
Red, yellow, green and white basket flashes or lights up continuously
(optional)
2. flashing standby: above 150H
3. stable standby: greater than 96H
Solar Spike Instructions
ModelXHY-D011D
- Configuration
|
Picture |
Technical parameters |
Description |
|
|
1.Power supply: solar cells (monocrystalline silicon)2.5V/120MA 2.Energy storage device: Ni-MH rechargeable battery1.2V/600MAH NI-MHHigh temperature battery 3.Working hours: under normal light intensity, one time8HContinuous support72H 4.Aluminum alloy shell compressive ability, static pressure>10tons 5.Display device: φ5super bright anti-fogLED, can be customizedLEDLamp bead color 6.Working mode: flashing (2Hz±20%) or 7.Start-up control light intensity: front light is less500Lux 8.Visual distance:>500Meters 9.Service life: effective use>3Year 10.Working environment:-20℃ ~ 60℃ 11.Specifications:105*105*75mm; 12Inner box:142*130*87MM (Two boxes) |
1. color: Red and yellow basket green and white flashing or always bright (optional)
|
2. packaging
|
Model |
Outer box size (m） |
Quantity (Pcs） |
Net weight (Kg） |
Gross weight (Kg） |
Material |
Volume (m3） |
|
CDN-D011D |
500*305*485MM |
80 |
26.4 |
29 |
K = K |
0.074 |
3. Packing List
|
Name |
Solar Spike |
Inner packing box |
Instructions |
Certificate |
|
Quantity |
80 |
40 |
1 |
1 |
4. installation
|
Side of the road (not recommended to install in the middle of the road, to avoid excessive impact of the car, resulting in damage to the spike) |
|
|
1Positioning: |
First use a ruler to determine the installation position,and openΦ20-26MMHole, depth45MM.Ensure that each position is in a straight line longitudinally, the installation distance shall be subject to the design requirements, and the installation place shall be flat, dry, clean and seamless. |
|
A glue for spike and B glue for spike. The ratio of A glue and B glue is 1:1 (e.g. 1kg of A glue and 1kg of B glue). Glue must be stirred evenly, consistent color. |
|
During installation, the road surface should be cleaned and the glue should be moderate. The bottom surface of the spike should be glued firmly without overflowing too much. About 40-50 grams of glue should be used for each spike. The glue should be applied to the bottom surface of the road sign and placed on the pre-marked position. After installation to clean up the road debris. |
|
5. Inspection: |
After two hours, the installed spike should be checked again. |
|
6. Road closure: |
It is recommended to seal the road for 6 hours to ensure the curing time of the glue. |
5. renderings
|
Individual regional installation renderings |
|
|
|
|
|
|
|
Related Products
Solar wall lamp, outdoor garden, balcony, decoration, waterproof wall, stairs, steps, night light
Intelligent light bulb lamp cup
Product inquiry
Shenzhen Xinheyue Technology Co., Ltd.
E-mail: xhytech002@xhytech.com.cn xhytech003@xhytech.com.cn xhytech004@xhytech.com.cn
Message consultation
Copyright©2024 Shenzhen Xinheyue Technology Co., Ltd.
Website construction: www.300.cn | SEO Tags| This site supports IPv6