Buy DM123 outdoor led spike lights
Key words:
Xinheyue
Buy DM123 outdoor led spike lights
Classification:
Product Details
Buy DM123 outdoor led spike lights
1. Power supply: solar cell (monocrystalline silicon) 2V/160MA
2. Energy storage device: NimH rechargeable battery 1.2V/1200MAH Ni-MH high temperature battery
3. Working time: under the standard light intensity, 8H can continuously support 72H
4. Cast aluminum shell with strong compressive strength, static pressure> 20 tons
5. Display device: φ5 super bright anti-fog LED, LED light color can be customized
6. Working mode: flashing (2Hz ± 20%) or stable on
7. Control light intensity: positive light is less than 50Lux
8. Sight distance:>500 meters
9. Service life: effective use> 3 years
10. Working environment:-20 ℃ ~ +60 ℃
11. Specification φ123*48.5mm;
12. Inner box: 144*140*60MM per box
13. Material: PC + cast aluminum
Product features:
1, pressure resistance is greater than 20 tons, pressure resistance is strong, not easy to be damaged.
2, solar independent power supply, long service life, green environmental protection.
3.LED light source, independent light, high brightness, long visual distance, good warning effect, LED life is more than 50000 hours
4. Protection grade IP68, good waterproof effect, better protect the internal components of the product.
5. Road use area: outline the rough outline of the road so that drivers can see visual warnings and guidance more clearly at night.
Parks, squares, intersections, villas, spikes can play a lighting effect in these places.
ModelXHY-DM123
- Configuration
Picture |
Technical parameters |
Description |
|
1.Power supply: solar cells (monocrystalline silicon)2V/200MA 2.Energy storage device: Ni-MH rechargeable battery1.2V/600MAH NI-MHHigh temperature battery 3.Working hours: under normal light intensity, one time8HContinuous support45H 4.Tempered glass compressive ability, static pressure>24tons 5.Display device: φ5super bright anti-fogLED, can be customizedLEDLamp bead color 6.Working mode: flashing (2Hz±20%) or 7.Start-up control light intensity: front light is less500Lux 8.Visual distance:>500Meters 9.Service life: effective use>3Year 10.Working environment:-20℃ ~ 60℃ 11.Specification φ123*48.5mm; 12Inner box:130*125*50mm a box |
1. color: Red and yellow basket green and white flashing or always bright (optional)
|
2. packaging
Model |
Outer box size (Cm) |
Quantity (Pcs) |
Net weight (Kg) |
Gross weight (Kg) |
Carton material |
Volume (m3) |
CDN-DM123 |
40*27.5*28 |
30 |
24 |
25.5 |
K = K |
0.0308 |
3. Packing List
Name |
Solar Spike |
Inner packing box |
Instructions |
Certificate |
Quantity |
30 |
30 |
1 |
1 |
- Pre-installation test: remove the solar spike and place it in the sun.5-10Minutes, and then cover the solar panel by hand, the light is normal, and the product can be used for normal installation;
4. installation
Sideline |
|
1. Positioning: |
First use a ruler to determine the installation position, and openφ125-130MM hole, depth 46-50MMEnsure that each position is in a straight line longitudinally, the installation distance shall be subject to the design requirements, and the installation place shall be flat, dry, clean and seamless. |
|
Special spikeA glue, spike special B glue, A glue B glue ratio is 1:1 (such as: A glue 1kg, B glue is 1kg). Glue must be stirred evenly, consistent color. |
|
During installation, the road surface should be cleaned and the glue should be moderate. The spike should be glued firmly without overflowing too much. About each spike needs to be used.About 120 grams of glue, the glue into the installation hole, check and remove the overflow of glue. |
5. Inspection: |
After two hours, the installed spike should be checked again. |
6. Road closure: |
Proposed road closure6 hours to ensure the curing time of the glue. |
Related Products
Product inquiry